Toilet Repair in Phoenix, Same-Day on Most Jobs
Running toilet, slow flush, loose base, or total failure: we fix or replace it, same day on most jobs.
A toilet problem feels minor right up until you realize how much of the day depends on it working. Running nonstop, rocking at the base, flushing weak, or not working at all, we repair it or put a new one in, same day on most jobs.
We give you the price before we start.
Common Toilet Problems We Fix
- Running toilet: constantly running water wastes more than 200 gallons a day. Usually a flapper, fill valve, or float adjustment. Inexpensive to fix and worth doing immediately.
- Weak or incomplete flush: often a flapper, flush valve, or rim jet issue. Can also indicate a partial clog in the trapway or drain line.
- Toilet rocking at the base: failed wax ring or cracked floor flange. Allows sewer gas into the home and causes subfloor damage if ignored.
- Toilet leaking at the base: typically a wax ring failure, especially in older installations.
- Handle doesn't work reliably: flapper chain or handle mechanism needs adjustment or replacement.
- Tank fills slowly or won't fill: fill valve or supply line issue.
- Toilet won't flush at all: could be a clog, a failed flush valve, or a main line issue if other fixtures are also affected.
Toilet Replacement: When Repair Isn't Worth It
We repair when repair makes sense. We recommend replacement when: the toilet is more than 20 years old and has had multiple repairs; the tank or bowl is cracked; repeated clogs suggest a design issue with the toilet itself; or when a homeowner simply wants to upgrade to a higher-efficiency, comfort-height, or dual-flush model.
Modern toilets use significantly less water per flush than models from the 1990s and earlier. If you're watching the water bill or just want an upgrade, toilet replacement is one of the cheapest plumbing improvements you can make. We install TOTO, Kohler, American Standard, and Gerber, and we walk you through the options before you commit.
Toilet Repair and Installation Cost in Phoenix
Every job starts with our $59 diagnostic. From there, whether it's a repair or a full replacement, you get the exact price upfront, no surprises. Ask about financing from $41/month for a full replacement.
Frequently Asked Questions
It starts with our $59 diagnostic. From there, whether it's a repair or a full replacement, we give you the exact price before we start.
Almost always yes. A running toilet wastes more than 200 gallons a day and will show up on your water bill fast. In most cases the fix is a flapper, fill valve, or float, an inexpensive part that takes under an hour to install. If the toilet is very old or the tank is cracked, we'll tell you honestly when replacement makes more sense.
A rocking toilet usually means the wax ring seal has failed or the floor flange has cracked. Left unfixed, it allows sewer gas to enter the home and can cause subfloor water damage. It needs to be addressed promptly. We reset the toilet, replace the wax ring, and check the flange condition.
Yes. We carry standard toilets on our trucks and can install a replacement same day on most jobs. If you have a specific model you want, call ahead and we'll confirm whether we can source it for a same-day visit or schedule for next day.
We install TOTO, Kohler, American Standard, and Gerber. We can recommend the right option for your situation, whether that's comfort height, elongated, or dual-flush, and price out several models before you decide.