Shower and Tub Plumbing Repair in Phoenix, Fixed Same Day on Most Jobs
The showerhead leaks. The water runs hot, then cold. The tub drains slow, or something is wet behind the wall. We diagnose and fix it, same day on most jobs.
Shower and tub problems run from small annoyances, like a slow drain or a dripping showerhead, to real structural damage, like a leak behind the wall. Phoenix's hard water wears out valves and cartridges faster than soft water does. Scale on the internal valve parts is one of the most common reasons a shower's temperature gets hard to set or a fixture starts to drip.
We handle shower and tub plumbing throughout the home: repair, replacement, and upgrades. Same day on most jobs, and you get the price before we start.
Shower and Tub Plumbing Problems We Fix
- Dripping showerhead: a worn cartridge or diverter valve. It wastes water and leaves mineral scale on your tile.
- Erratic water temperature: cartridge wear from hard water scale. The temperature gets hard to set, or the valve sticks. Common in Phoenix after 8 to 12 years.
- Shower pressure too low: a blocked showerhead (hard water scale), a partly closed valve, or a supply line problem.
- Tub faucet dripping: worn stems, worn seats, or a worn cartridge, depending on the valve type.
- Tub spout leaking or broken: replacing the spout is a straightforward repair.
- Slow tub drain: hair and soap built up at the strainer, the trip lever, or the P-trap. We clear the whole drain path.
- Leak behind shower wall: we find the source before we open anything. It can be a failed valve, cracked tile letting water through, or failed grout.
- Anti-scald valve needed: we install thermostatic pressure-balancing valves that stop the scalding temperature swings.
Hard Water and Phoenix Shower Fixtures
Phoenix water carries 172 to 302 ppm of dissolved mineral, and the city publishes that range itself. It comes out as calcium carbonate inside cartridge valve channels, on showerhead nozzles, and on tub spout aerators. The white scale on the outside of a fixture is the part you can see. Over time the buildup inside is what costs you flow, steady temperature, and a handle that turns easily.
A water softener is the long-term solution. In the meantime, annual cartridge inspection and aerator cleaning add years to fixture life.
Shower and Tub Plumbing Repair Cost
Every job starts with our $59 diagnostic, the same fee at 2 PM or 2 AM. Cartridge replacement, full valve replacement, a tub spout or showerhead swap, or drain clearing: whatever the job is, you get the exact price before we start.
Frequently Asked Questions
It starts with our $59 diagnostic. Whether it's a cartridge replacement, a full valve replacement, or a tub spout or showerhead swap, we give you the price before we start.
Usually a worn cartridge. Phoenix hard water deposits calcium carbonate on the cartridge over time, causing it to stick, making temperature control erratic. Cartridge replacement restores precise temperature control. Anti-scald valves (which limit maximum temperature) can also be added at the same time.
Serious. A slow leak behind the wall grows mold, rots the framing, and ruins the drywall over time. It usually goes unnoticed until you see discoloration or feel a soft spot. If you think there's a leak back there, have it looked at right away. The sooner it's found, the less there is to repair.
Yes. Tub drains clog with hair and soap at the strainer and in the P-trap. We clear the drain, check the overflow plate and the trip lever, and leave it running right. If the trouble is deeper in the line, like hard water scale, we can run a camera and hydro jet it.
Start with the showerhead. Hard water scale blocks the holes, and it is the cheapest thing to rule out. Take the head off and soak it in vinegar overnight. If the flow comes back, that was it. If it doesn't, the trouble may be in the valve, a partly closed shutoff, or a supply line somewhere else in the house.